Visonic KF-234 PG2 - Page 16

NEXT CAM PG2, NEXT-K9 CAM PG2
D-302758 15
10.
11.
or
Select between "NOT Active", "YES – no delay", "YES + 5s delay",
"YES + 15s delay", "YES + 30s delay", "YES + 1m delay", "YES + 2m
delay", "YES + 5m delay", "YES + 10m delay", "YES + 20m delay" and
"YES + 60m delay".
12.
13.
Here you determine whether or not to report power failure and restore.
14.
15.
or
Select between "NOT connected" and "Connected to AC".
16.
17.
Here you determine whether the image will be in black & white or color.
18.
19.
or
Select between "Black & White" and "Color".
20.
21.
Here you set the pixel quality of the image. Select 160 x 120 for lower
quality or 320 x 240 for higher quality.
22.
23.
or
Select between "Resol. 160 x 120" and "Resol. 320 x 240".
24.
25.
Here you set the brightness of the image.
26.
27.
or
Select between "-3", "-2", "-1", "Normal", "+1", "+2" and "+3".
28.
29.
Here you set the contrast of the image.
IMAGE CONTRAST
IMAGE BRIGHTNESS
N
ormal

IMAGE BRIGHTNESS
IMAGE RESOLUTION
IMAGE COLOR
B
lack & White

IMAGE COLOR
R
esol. 160 x120

IMA
G
E RESOLUTION
A
C POWER CONNECT
N
OT connected

A
C POWER CONNECT
D
ISARM Activity
N
OT Active
