EasyManua.ls Logo

Visonic KF-234 PG2 - Camera Motion Sensor Installation and Comments

Visonic KF-234 PG2
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEXT CAM PG2, NEXT-K9 CAM PG2
D-302758 17
6. INSTALLATION
6.1 General Guidance (see fig. 4)
1. Keep away from heat
sources.
2. Do not expose to air
drafts.
3. Do not install outdoors.
4. Avoid direct sunshine.
5. Keep wiring away from
power cables.
6. Do not install behind
partitions.
7. Mount on solid stable
surface.
1 2 3
4 5 6
7
Figure 4. General Guidelines
Important! The Next-K9 CAM PG2 detector is immune to 38 kg
(85 lb) animals moving on the floor or climbing on furniture as
long as the activity takes place below 1 m (3 ft). Above the 1 m
(3 ft) height limit, the detector is immune to 19 kg (42 lb) pets,
but the pet immunity will decrease as the pet gets closer to the
detector. It is therefore recommended to select a mounting
location that minimizes potential close proximity of animals.
6.2 Mounting
1
2
Release
screw
Remove
cover
from base
3
Position the battery in the battery holder and
insert the battery connector terminal into
the battery connector
Battery connector

Table of Contents

Other manuals for Visonic KF-234 PG2

Related product manuals