Visonic KF-234 PG2 - Siren Diagnostics and Tamper Alarm

SR-730 PG2
42 D-302758
5.
Here you determine whether or not to activate the exit – entry beeps, and
if enabled, whether to activate in HOME or AWAY mode.
6.
7.
or
Select between "Disabled", "Disabled & Home" and "Enabled".
8.
9.
Here you determine whether or not to activate the squawk, and if enabled,
whether to activate the sounder only, or, the sounder and strobe
simultaneously.
10.
11.
or
Select between "Disabled", "Sounder only" and "Sounder+strobe".
12.
13.
Here you determine the volume level of the sounder.
14.
15.
or
Select between "Volume HIGH", "Volume LOW" and "Volume MID".
16.
17.
Here you determine whether or not the LED will be activated to indicate
that the siren is operating.
18.
19.
or
Select between "Disabled", and "Enabled".
20.
21.
Here you determine whether or not to report a power failure and restore.
22.
23.
or
Select between "Not Connected" and "Connected to AC".
24.
25.
A
C POWER Connect
N
ot Connected

A
C POWER Connect
A
CTIVITY LED
D
isabled

A
CTIVITY LED
S
OUNDER VOLUME
V
olume HIGH

S
OUNDER VOLUME
S
QUAWK
D
isabled

S
QUAWK
E
XIT
-
E
NTRY Beeps
D
isabled

E
XIT
-
E
NTRY Beeps