APPENDIX A. PowerMaster 360 Configurator
D-305735 PowerMaster 360 Installer's Guide 63
A2. Manually Installing the USB Driver
1. Connect the USB cable to the PowerMaster 360 and to the laptop;
the following message will appear in the bottom right corner of the
2. If installation is successful, the following message will appear.
The screen below then opens.
Note: ELMO GMAS (COMxx) may appear instead of Gadget
Serial (COMxx) in both this message and in the screen below.
3. If Windows does not recognize the software
during startup, the following message will
To Next Page
Loading...
