45
Quantum Plus installation and user manual
Preset positions
1. To store a preset position
Move the camera to the required position then press the record key followed
by the number key of the preset to be stored (1 – 9)
2. To recall a Preset
Press the search key followed by the number (1 -9).
Run Tour 1
To run Tour 1, press the search key followed by the number 0 (Zero). The tour
requires a keyboard to set it up in the domes menu.
Remote control functions
Camera selection
The PTZ cameras can be controlled in either full screen or split screen mode. If in full
screen mode press the camera selection key , the camera icon will step from one
camera to the next on the split screen. When the icon appears on the camera to be
controlled then press the PTZ key .
If in full screen mode then simply press the PTZ key .
Pan and Tilt control
To move the dome left / right / up or down use the arrows keys .
To Next Page
Loading...
