2550 Video Phone User Manual IMT
Page - 18 -
If you still wish to use manually-assigned IP address, please press ‘Cancel’; if
you wish to enable DHCP function, please press ‘Yes’, and the following
message will appear:
Please input correct admin password (default value is ‘123456’), and then press
‘Save’ key. This phone will reboot after you pressed ‘Save’ key, please wait for
few minutes until reboot procedure is complete.
03:00 01/01/2007 2550 1101
Day Light Saving Enabled
Synchronization
Date Format
Cancel
Admin Password
System Is Going To
Save
Delete
To Next Page
Loading...