2550 Video Phone User Manual IMT
Page - 58 -
3-5 Change Video Preference
To display the best quality of image on the LCD display of your 2550 video
phone, please adjust the video preference to meet your environment
requirement.
Press “Main Menu” key to enter main menu, then use up / down key and OK key
to go “Setting” -> “Initial Setup” -> “Video Preference”.
Please use up / down key to select a setup item to set, then press “OK” key:
LCD Settings:
There are 2 sub items inside this setting item; they are “Brightness” and
“Contrast”. Please select the item you wish to set, and press left / right key or - /
+ key to adjust. You can see the change on LCD display when you press the key,
when you’re satisfied with new brightness or contrast setting, press “OK” key, or
press “Cancel” key to keep original setting;
Video Quality:
You can adjust the quality of sending image here, there are 3 options: Low
Quality, Standard, and High Quality. Please use up/down key to select a quality
setting, and press “Select” or “OK” key to save change you made. You can also
03:00 01/01/2007 2550 1101
Vid
Video Quality
Video Resolution
Camera Frequency
TV Output Format
Exit Select Back
To Next Page
Loading...