2550 Video Phone User Manual IMT
Page - 9 -
(4) Connect the Ethernet cable to the LAN Ethernet jack <H>, and connect
the other end of Ethernet cable to your LAN (Local area network).
(5) If you have a computer or other network device, you can connect its
Ethernet cable to PC Ethernet jack <I> on this phone, then your PC or
network device can be connected to the LAN via this phone.
(6) Build the connection between your TV set and this video phone by A/V
cable (sold separately). A/V cable is color-coded (yellow for video, white
for left audio channel, and red for right audio channel), please connect
this IP phone and your TV set’s A/V connector according to the color
shown on the A/V cable.
You can skip this step if you don’t want to use TV with this phone.
(7) Insert the power plug of A/C adapter to the power jack <C>.
Hint: If your TV set only has 1 audio input, please connect the left audio channel
of this phone to your TV set.
Here!
To Next Page
Loading...