pg. 20
VOLCON BRAT OWNER’S MANUAL
DANGER: PLEASE READ THE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
ASSEMBLY. THIS WILL ENSURE THE PROPER ASSEMBLY AND FUNCTION OF
YOUR BRAT. FAILURE TO DO SO COULD RESULT IN DAMAGE TO THE BIKE AND
SERIOUS PERSONAL INJURY OR DEATH!
Q Quick Tip: Check out our how-to assembly video on our website www.volcon.com
for systematic instructions.
Instructions:
1. Remove the six locking tabs (three on each side) that are at the bottom of the
box, by pinching the two center tabs and pulling the entire locking tab away
from the box.
2. Lift the entire box top up and away from the bike and bottom base of the box.
3. Leave the Brat in the base for more stability until you have installed the kick
stand.
4. Install the kickstand before removing the Brat from the base of the box.
5. Please read the assembly instructions in full before beginning the assembly of
your new e-bike.
If any serious damage has occurred to your Brat during shipping, please
submit photos to your original dealer or VOLCON directly by emailing us at
customer care service@volcon.com
UNBOXING INSTRUCTIONS
To Next Page
Loading...