VOLCON BRAT OWNER’S MANUAL
pg. 39
Powering On the Bike
Figure 23 - Powering Bike
Before powering on the e-bike, always ensure that you are firmly
seated on the bike; the kickstand is fully retracted parallel to the
ground and both hands on the handlebar grips.
How to Power on the Bike
1. Ensure that the battery is fully seated and locked into the battery holder
(remove battery key).
2. Flip the power switch to the “ON” position, on the right side of the battery.
3. Press the power button on the D-Pad until the display illuminates the Volcon
name.
4. After the display is powered on, it shows the real-time speed and the single trip
mileage by default.
5. By pressing the (וֹ) button on the D-Pad, the display information switches
between single mileage (Trip), total mileage (ODO), maximum speed (MAX)
and average speed (AVG).
To Next Page
Loading...