VOLCON BRAT - Tire Inflation

pg. 28
VOLCON BRAT OWNER’S MANUAL
NOTE: The tires are partially inated when shipped from the factory. After
completing the assembly steps, please refer to the following instructions to
inate you tires.
Figure 16 - Tire Inating
• Make sure the tire is properly centered and seated on the rim correctly.
• Make sure the valve stem is perpendicular to the rim and not leaning in one
direction more than the other is.
• Inate both tires to the proper PSI.
• PSI preference will change according to the rider’s weight and terrain.
• Recommended tire pressure is 20 PSI MAX (Figure 17)
Figure 17 - Tire Pressure
TIRE INFLATION