VOLCON BRAT OWNER’S MANUAL
pg. 55
Cleaning
WARNING: DO NOT CLEAN YOUR BRAT WITH A STRONG WATER JET
OR STEAM JET LIKE ONE FROM A POWER WASHER. THE WATER CAN PASS
THROUGH THE SEALS AND GET INSIDE THE BEARINGS AND DILUTE THE
LUBRICANTS WHICH COULD INCREASE FRICTION. THIS WILL REDUCE THE
LIFESPAN OF THE BEARINGS AND OTHER PARTS.
• Excessive dirt, salt, and other elements can damage the bike. Make sure to
regularly clean the e-bike and take steps to protect it against corrosion.
• Use clean water for cleaning and gentle soap if necessary to dissolve grease
and other residues. Do not spray water directly onto the bike, especially on the
electrical components. Instead, use a damp cloth to wipe down any dirt or
debris. After drying, treat surfaces with a care product. Finally, wipe all parts
with a clean, soft cloth.
To Next Page
Loading...