EasyManua.ls Logo

VOLCON BRAT - Pre-Ride Checklist; Comprehensive Bike Inspection

VOLCON BRAT
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
pg. 34
VOLCON BRAT OWNER’S MANUAL
CHECKLIST:
1. Wheels
Check the condition of both tires making sure the tread is in good condition free
from punctures, cracks, and deformations.
Maintain proper tire pressure. We recommend a range of 20-25 PSI (1.37-1.72
bar) dependent on the weight of the rider and the type of terrain.
Ensure wheels are true and properly spinning without binding.
2. Battery
Check that the battery is fully charged and inserted securely: push the battery
into its holder until it clicks into the lock. Remove the key from the lock and pull
the battery to check if it has indeed locked into place.
Check the charge status of the battery. Familiarize yourself with battery
charging and storage best practices.
3. Brake System
Squeeze both brake levers. You should feel an obvious pressure and the levers
should not be able to touch the handle.
4. Lighting
Check if the front and rear lights are working properly. Do not cover any lighting
or reectors.
5. Cables
Look out for any loose cables. Make sure the male and female plugs are
properly connected.
There should be no strain on any wiring near the fork when turning the
handlebars from the left to the right.
Verify that wiring on the frame is secure and free from any moving parts that
may damage the wiring. This includes any wires and brake cable lines near the
wheel or other moving parts.
6. Display
Check that your display turns on and functions properly.
7. Kickstand
Make sure that the kickstand is tightly secured, and not rubbing against the
ground or tires.
WARNING: DO NOT SIT ON THE BIKE WITH THE KICKSTAND ENGAGED.