EasyManua.ls Logo

VOLTCRAFT FG-1302 - Sweep Characteristics

VOLTCRAFT FG-1302
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.Specification
59
BPSK
Carrier Sine wave, square wave, ramp wave, arbitrary wave (except DC)
Modulated signal
source
Internal
Internal modulation
waveform
50% square wave
BPSK rate 2 mHz to 1MHz
Phase deviation range
360°
Data source 01patt, 10 patt, PN15, PN21
QPSK
Carrier Sine wave, square wave, ramp wave, arbitrary wave (except DC)
Modulated signal
source
Internal
QPSK frequency 2 mHz to 1MHz
OSK
Carrier
Sine wave
Modulated signal
source
Internal
Internal modulation
waveform
50% square wave
Oscillation time
8ns to 250s
OSK frequency 2 mHz to 100kHz
SUM
Carrier Sine wave, square wave, ramp wave, arbitrary wave (except DC)
Modulated signal
source
Internal or external
Internal amplitude
modulation frequency
2 mHz to 100kHz
Depth 0% to 100%
Sweep Characteristics
Sweep Characteristics
Carrier
Sine, square wave, ramp wave, arbitrary wave (Except DC)
Minimum/maximum
starting frequency
1 μHzminimum/ maximum frequency of corresponding carrier
Minimum/maximum
termination
frequency
1 μHzminimum/ maximum frequency of corresponding carrier
Types
Linear, logarithmic
Sweep time
1 ms to 500 s ± 0.1%
Trigger source
Internal, external, manual

Table of Contents

Related product manuals