9 Install the wear washer (1).
Press in
the impeller (2) with a rotating movement
(clockwise).
Install the impeller cover (3) and gasket.
10 Fit a new O-ring and the gearwheel (1) with a
washer and nut on the seawater pump shaft.
Install the seawater pump.
Finishing off
11 Open the sea cock, or S-drive valve.
Start the engine and check that no leakage
occurs.
P0018159
P0018119
26-6 Sea Water System, Sea Water Pump
126 47701798 05-2013 © AB VOLVO PENTA
To Next Page
Loading...
