Volvo Penta D1-13 - Crankshaft, Removal

Crankshaft, Removal
Removed pistons, flywheel and timing gear
1 Unbolt the inner timing gear plate (1
).
2 Remove the rear crankshaft seal (1).
3 Unscrew the oil pressure relief valve.
4 Undo the bolts (1) that hold the main bearing
caps.
Lift the crankshaft out.
NOTICE! Tape the crankshaft gear teeth to pro-
tect the bearing when the shaft is pulled out.
1
P0008101
1
P0008102
1
1
1
P0008103
21-6 Crank Mechanism
94 47701798 05-2013 © AB VOLVO PENTA