6 Torque the
cylinder head bolts (3) in three stages,
of which the last stage must be to the stated tor-
que. Refer to tightening sequence and torque in
Tightening torques page 9.
Re-tighten all bolts.
7 Install the glowplugs (4) and current bar (5).
8 Install the push rods (6), valve caps (7) and rocker
arm mechanism (8) with gasket. Torque the nuts
(9); refer to Tightening torques page 9.
21-1 Cylinder Head
47701798 05-2013 © AB VOLVO PENTA 57
To Next Page
Loading...
