DD-29/31HF/38HF Vibratory Asphalt Compactors 3
PROCEDURE WHEN RECEIVING THE MACHINE
Your machine has been tested, accurately checked, and prepared for shipment. Every part of
the machine, including the detached parts, has been accurately checked before being shipped
from the factory.
When you receive the machine, and before unpacking the equipment, check if damage has
occurred during transport and if any parts are missing.
Check the equipment by consulting the shipment documents.
If goods are damaged or if parts are missing, inform the freight agent as soon as possible.
They will inform you regarding how to proceed in order to make a complaint.
IDENTIFICATION DATA
An exact description of the model type and serial number of your machine will facilitate fast
and efficient response from our parts and service operations.
Always provide the model of your machine and its serial number when you contact the local
service or parts office.
We advise you to enter your machine data in the following lines to maintain machine and
engine information:
Model .......................................
Serial No. .................................
Year of Manufacture ................
Engine Serial No. and type of engine ........................................
MACHINE IDENTIFICATION
The machine identification plate (1, Figure 1) is located on the forward left side of the rear
frame.
Figure 1
To Next Page
Loading...
