OPERATING INSTRUCTIONS SECTION 4
DD-29/31HF/38HF Vibratory Asphalt Compactors 4-17
PARKING, STOPPING AND SHUTTING DOWN THE MACHINE
Parking the Machine
1. To park the machine, move to firm, level ground. If circumstances require
parking the machine on other than level ground, chock the drums.
2. To stop the machine upon reaching destination, use the following procedure.
Stopping the Machine
1. If drum vibration is active, press vibration ON/OFF switch (15, Figure 4-23) to
stop vibration.
2. If water spray system is ON, move water spray switch (3, Figure 4-24) to the
OFF (middle) position.
3. For normal stopping, move the propulsion control (14, Figure 4-23) slowly to the
STOP position.
4. To ensure no machine movement occurs after stopping, apply parking brake by
pressing on the right side of park brake switch (9, Figure 4-26) Indicator light
will turn ON.
Figure 4-26