Vorwerk KOBOLD VB100 User Manual (English)

Other manuals for Vorwerk KOBOLD VB100

Questions and Answers:

J
Jay SmithSep 6, 2025
Why won't my Vorwerk Ultrasonic Jewelry Cleaner turn on?
- S
  Stacey AndersonSep 6, 2025
  Your Vorwerk Ultrasonic Jewelry Cleaner might not be turning on for several reasons. It could be in transport mode (as delivered), so try charging it. The battery pack might be empty, so charging it is recommended. Ensure the charger is correctly connected; a pulsating indicator confirms charging. Also, verify the battery pack is correctly inserted. Finally, disconnect the cleaner from the charger, as it won't start while connected.
T
Thomas WellsSep 7, 2025
What to do if the LED display lights up yellow on my Vorwerk Ultrasonic Jewelry Cleaner?
- M
  Mr. Chris CamposSep 8, 2025
  If the LED display on your Vorwerk Ultrasonic Jewelry Cleaner lights up yellow, it could be due to several reasons: the filter bag might be full, so you should insert a new one; the item you are cleaning might be too dense, so try cleaning a different item and check the LED display again; or the suction channels may be blocked, so you should check and clean them.
F
Felicia WatersSep 9, 2025
Why is my Vorwerk Ultrasonic Jewelry Cleaner Kobold electric brush so loud?
- K
  Kurt HawkinsSep 9, 2025
  If your Vorwerk Ultrasonic Jewelry Cleaner's electric brush is too loud, consider these possibilities: the roller brushes might not be correctly inserted, so check their placement; non-original Kobold accessories could cause noise and damage, so use only original Kobold roller brushes; or an object might be stuck in the roller brush area, so remove any obstructions.
K
Keith YoungSep 12, 2025
Why is the LED display flashing red on my Vorwerk Ultrasonic Jewelry Cleaner?
- J
  jfrazierSep 12, 2025
  The LED display on your Vorwerk Ultrasonic Jewelry Cleaner might flash red due to high temperatures slowing down the charging process. Avoid charging the device in direct sunlight. Charging may also take longer after intensive use or at high temperatures. The charging process can be accelerated by removing the battery pack from the device and charging it directly on the AC charger.
W
William RamirezSep 12, 2025
How to fix a Vorwerk Ultrasonic Jewelry Cleaner electric brush that is not vacuuming properly?
- T
  Tyler AdamsSep 12, 2025
  If the electric brush on your Vorwerk Ultrasonic Jewelry Cleaner isn't vacuuming properly, the suction duct of the electric brush may be blocked. Open the inspection flap on the underside of the electric brush, remove the blockage, and then put the inspection flap back on.
C
Christopher RobertsSep 14, 2025
What to do if my Vorwerk Ultrasonic Jewelry Cleaner Kobold electric brush switches off and the LEDs flash red?
- A
  Adam SimonSep 14, 2025
  If the Kobold electric brush on your Vorwerk Ultrasonic Jewelry Cleaner switches off and the LEDs flash red, a vacuumed object or threads may be blocking the brushes. Here's what to do: * Switch off the cleaner and disconnect the electric brush. * Remove any obstructing objects. * Cut and remove any threads blocking the brushes. * If the carpet is too dense, briefly lift the electric brush, place it on a hard floor, switch to ‘Brush off’ mode, or switch the cleaner to the ‘soft’ setting.

Vorwerk KOBOLD VB100 Specifications

General

Brand	Vorwerk
Model	KOBOLD VB100
Category	Vacuum Cleaner
Language	English

Summary

Introduction and Guide

Before You Start

Instructions on how to use the manual for initial setup and future reference.

Signs and Symbols Guide

Explains the meaning of warning symbols, information icons, and website references used in the manual.

Product Overview

VB100 Cordless Vacuum Cleaner Components Diagram

Illustrates the main parts of the Kobold VB100 cordless vacuum cleaner and its accessories with numbered labels.

Legend for Product Components

VB100 and Accessory Identification

Provides a detailed list and description for each numbered component shown in the product overview diagram.

Accessory Head Suitability for Floors

Floor Type Compatibility Guide

Details the suitability of the Kobold EBB100 and Kobold 2-in-1 nozzle for various carpet and hard floor types.

Safety Information

Intended Use and Safety Guidelines

Specifies the intended purpose and general safety guidelines for the Kobold VB100 Cordless Vacuum Cleaner.

Hazard Warnings and Risks

Details critical safety warnings related to electric shock, explosion, fire, and improper handling of the device.

Danger Levels and Warning Symbols

Explains the different danger levels (3, 2, 1) indicated by warning symbols and signal words in the manual.

Getting Started

Attaching and Detaching Accessory Head

Instructions for connecting and disconnecting the Kobold EBB100 Electric Brush from the vacuum cleaner.

Standby and Power Settings

How to place the vacuum cleaner in standby mode and switch between power settings for operation.

Charging the Cordless Vacuum Cleaner

Detailed steps for charging the VB100 battery, including LED indicators for charge status.

Filter Bag, Motor Filter, and Battery Pack

Information on the pre-installed filter bag, motor protection filter, and battery pack, and when to check or replace them.

Operating the Vacuum Cleaner

Powering On/Off and Suction Levels

Instructions for switching the vacuum cleaner on/off and adjusting the suction power level.

Using the Kobold EBB100 Electric Brush

Covers brush modes, usage instructions, and flex/fine settings for the electric brush attachment.

Using the Kobold 2-in-1 Nozzle

Details on how to attach and use the versatile 2-in-1 nozzle for different cleaning tasks.

Storing and Moving the Vacuum Cleaner

Guidance on proper storage methods and activating transport mode for safe movement of the device.

Operating Modes and Battery Life

Understanding Operating Modes and Runtimes

Explains the different operating modes and their corresponding battery runtimes based on suction power and brush usage.

Maintenance and Care

Spare Parts and Consumables

Information on how to reorder original care products and consumables for the vacuum cleaner.

Maintaining the VB100 Cordless Vacuum Cleaner

Covers replacing the filter bag, cleaning/replacing the motor protection filter, and changing the battery pack.

Maintaining the EBB100 Electric Brush

Instructions for checking, cleaning, and changing the roller brushes of the electric brush attachment.

Troubleshooting

VB100 Cordless Vacuum Cleaner Issues

Lists common faults with the VB100, such as not switching on, and their possible causes and solutions.

EBB100 Electric Brush Issues

Addresses problems with the electric brush, like loudness, blockages, or not vacuuming properly, and their rectifications.

Disposal and Environmental Protection

Device, Battery, and Packaging Disposal

Guidelines for the proper disposal of the device, battery pack, and packaging according to regulations.

Environmental Protection Information

Details Vorwerk's commitment to environmental protection, including less packaging, energy saving, and recyclable materials.

Warranty and Service

Warranty Information

Details on how to find warranty services through order notes or purchase contracts.

Customer Service Contact

Information on how to contact customer service representatives or visit the Vorwerk website for support.

Technical Data

VB100 Vacuum Cleaner Specifications

Provides detailed technical specifications for the Kobold VB100 Cordless Vacuum Cleaner.

EBB100 Electric Brush Specifications

Lists the technical specifications for the Kobold EBB100 Electric Brush, including motor, voltage, and dimensions.

Related product manuals