What to do if my Voxson VLCD 26D remote control malfunctions?
If your Voxson LCD TV remote control isn't working, first, make sure the batteries are installed with the correct polarity. If they are, try replacing the batteries with a fresh set, as the current ones may be completely discharged.
What to do if there is a picture but no sound on my Voxson VLCD 26D?
If you see a picture but can't hear any sound on your Voxson LCD TV, first, try turning up the volume. Also, make sure that the mute function is not active by pressing the Mute button again. Finally, verify that the audio cable is properly connected.
Why is there no picture on my Voxson LCD TV screen?
If your Voxson LCD TV is on but the screen is blank, the brightness might be set too low. Try adjusting the brightness and contrast. If that doesn't work, the fluorescent tube may be defective, as these tubes have a lifespan of about 50,000 hours.
What to do if my Voxson LCD TV has a blurred or snowy picture?
If your Voxson LCD TV picture is blurred or snowy, check that the antenna is correctly pointed. Also, ensure the antenna cable is securely connected to the 'ANTENNA' jack on the back of the TV.
How to fix duplicated pictures on Voxson LCD TV?
Duplicated pictures on your Voxson LCD TV screen may be caused by reflected broadcasting signals due to nearby mountains, buildings, or trees. Check for any tall objects like skyscrapers near your house and ensure the antenna is correctly aligned.
Why does my Voxson LCD TV have no picture and the power LED is off?
If your Voxson LCD TV has no picture and the power LED is off, there may be a power connection problem. Check the power cable to ensure it's properly connected to the power connector. You may also need to press the power switch again, depending on your specific model.
Why is there noise on the radio when my Voxson VLCD 26D is on?
The noise you hear on the radio when your Voxson LCD TV is on may occur if the radio is too close to the TV. Try creating more distance between the radio and the LCD TV.
Key safety guidelines for product operation, covering general precautions and usage advice.
Identifies and explains the buttons and indicators on the front panel of the TV.
Instructions for connecting external TV sources like antennas or cable boxes without a decoder.
Steps to connect and watch content from an external TV or AV device.
Guide for linking the TV to a digital audio system for enhanced sound output.
Details on connecting VCRs, DVD players, or STBs using video, S-video, and audio cables.
Procedure for connecting a Digital Television (DTV) receiver for digital broadcast reception.
Instructions for establishing high-definition connections using HDMI or DVI interfaces.
Step-by-step guide on powering the television unit on, off, and using standby mode.
Procedure to choose the preferred language for on-screen menus and system messages.
How to display current TV settings like input source, picture mode, and sound mode.
Methods for controlling audio volume levels and temporarily silencing the sound output.
Automatic scanning and storage of available TV channels for easy selection.
Step-by-step process for manually tuning and saving specific TV channels.
How to assign custom names to stored TV channels for easier identification.
Enables or disables the child lock feature to restrict access to certain programs or channels.
Features for deleting, moving, copying, and skipping stored TV channels.
Methods for selecting different TV channels using buttons or number input.
Guidance on fine-tuning picture settings for unstable or low-quality images.
Choosing preset picture modes (Standard, Dynamic, Mild, User) for optimal viewing.
Controls for contrast, brightness, sharpness, and color to customize the picture display.
Adjusting the audio volume specifically for headphone output.
Customizing audio frequency response to enhance low and high tones.
Switching between stereo, mono, or dual audio tracks based on broadcast signals.
Selecting different aspect ratios (Wide, 14:9, 4:3, Zoom) for video playback.
Pausing the current video frame to allow for closer examination.
Enabling and managing the Picture-in-Picture feature to display two video sources simultaneously.
Selecting the video input signal for the secondary PIP window.
Selecting the TV or CATV channel for the secondary PIP window.
Adjusting the location of the secondary PIP window on the screen.
Choosing audio source (main screen or PIP) for speaker output.
Configuring headphone audio output for main or sub-picture audio.
Adjusting the internal clock for accurate timekeeping and scheduling functions.
Programming the TV to automatically turn on or off at a specified time.
Configuring the channel and volume for automatic TV turn-on.
Scheduling the TV to automatically turn off after a set duration.
Enabling or disabling a melody that plays when the TV is turned on or off.
Changing the system password for security and access control.
Introduction to teletext services, including types of information provided and page structure.
Instructions on how to activate and view teletext content on the TV screen.
Directly accessing specific teletext pages using numeric buttons on the remote.
Utilizing color-coded buttons to navigate and select topics within teletext pages.
Guide for connecting a computer to the TV using D-Sub and audio cables.
Fine-tuning PC screen positioning, frequency, phase, and auto-adjustment for optimal display.
Steps to insert and play DVD discs, including initial setup and playback controls.
Viewing information related to DVD playback, such as title, chapter, and time remaining.
Functions for fast-forwarding, reversing, skipping, or stepping through DVD content.
Setting up repeat playback for titles, chapters, tracks, or specific A-B sections.
Selecting preferred audio languages and subtitle tracks available on DVD discs.
Adjusting video display size and selecting different camera angles for DVDs.
Basic controls for accessing disc menus and titles.
Directly navigating to a specific title, chapter, or time on the DVD.
Instructions for playing audio files from MP3 discs, including repeat playback.
Guide for playing MPEG-4 video files from discs, noting compatibility and limitations.
Displaying JPEG files and Kodak Picture CDs, including automated slide shows.
Selecting from various visual transition effects for photo slideshows.
Configuring slideshows to play with background music from MP3 files.
Configuring language preferences for audio, subtitles, and disc menus.
Adjusting TV screen aspect ratio (4:3, 16:9, PS, LB) for optimal video display.
Configuring speaker output settings, including downmix and stereo modes.
Configuring digital audio output, dual mono, stereo, and dynamic audio settings.
Setting up custom features like MPG/JPG logos and parental controls.
Changing the system password for security and access control.
Technical specifications and compatibility details for MPEG-4 video and audio playback.
Procedure for registering and playing DivX Video on Demand content.
List of common TV problems, their possible causes, and recommended solutions.
Addressing blurred/snowy pictures and screen flickering with specific troubleshooting steps.
Diagnosing and resolving issues with the remote control's functionality.
Details on supported PC resolutions, frequencies, and signal modes.
Table showing input compatibility for Picture-in-Picture (PIP) mode across different sources.
General| Screen Size | 26 inches |
|---|---|
| Display Technology | LCD |
| Aspect Ratio | 16:9 |
| Speakers | 2 x 10W |
| Resolution | 1366 x 768 pixels |
| Inputs | HDMI, Composite, Component, VGA |
To Next Page