BA 1404 en – Edition 2.7 * 1404b340.fm 3-79
Operation
Working with the drive force
☞ Do not allow the bucket to penetrate into the ground and do not excavate by using the
drive force of the machine.
➥ This can damage the machine or the work equipment.
Working with the falling force by lowering the bucket
☞ Do not use the machine’s falling force for excavating, and do not use the bucket’s fall-
ing force as a hoe, hammer or pile-driver.
➥ Working this way can greatly reduce the machine’s service life.
Working with the falling force by lowering the machine
☞ Do not use the machine’s falling force for excavating.
Retracting attachments
☞ Ensure that the bucket does not hit the stabilizer blade as you retract attachments for
driving or transport.
No thrusting the stabilizer blade
☞ Do not thrust the stabilizer blade against rocks or blocks to avoid damage to the cylin-
ders and the blade itself.
Fully lowering the stabilizer blade
☞ Fully lower the stabilizer blade when using it on the side opposite the excavation side.
Abb. 165: Working with the drive force
Abb. 166: Working with the falling force by lowering the bucket
Abb. 167: Working with the falling force of the machine
Abb. 168: Retracting attachments
Abb. 169: Fully lowering the stabilizer blade
To Next Page
Loading...
