3-22 BA 1404 en – Edition 2.7 * * 1404b330.fm
Operation
Lateral angle of inclination
Do not exceed a maximum lateral angle of inclination of 10°.
On lateral inclinations over 10°, pile up material to create a level surface that can be used
as a platform for the machine.
3.9 Stabilizer blade operation
When the stabilizer blade is lowered too deeply into the ground it can cause
resistance.
☞ Slightly raise the stabilizer blade.
Abb. 59: Lateral angle of inclination (symbolic representation)
< 10°
Abb. 60: Platform (symbolic representation)
> 10°
To Next Page