Wacker Neuson E09-01

BA 1404 en – Edition 2.7 * 1404b330.fm 3-23
Operation
1 Raise the control lever base.
2 Make sure that the lever A is situated left under the driver`s seat in position 1 .
3 Lower the control lever base.
4 Set the stabilizer blade in the required position:
☞ Raise the stabilizer blade: lever B is to be pulled back.
☞ Lower the stabilizer blade: lever B to be pushed forward.
Notice!
Check the position of the stabilizer blade before driving the machine.
Position lever A
Function
1
The stabilizer blade is actuated.
2
The telescopic travel gear is actuated.
Abb. 61:
1 2
A
Abb. 62:
Abb. 63:
B