BA 1404 en – Edition 2.7 * 1404b330.fm 3-19
Operation
Hydraulic brake
Releasing the drive levers/accelerator pedals brakes the machine.
During downhill machine travel, the automatic hydraulic brake valves prevent the machine
from moving faster than the permissible travel speed.
Reduce travel speed with the drive levers/accelerator pedals, and not with the
engine speed control of the engine.
Stabilizer blade as a parking brake The stabilizer blade is used as a parking brake. Press the stabilizer blade against the
ground.
Operating temperature range The following operating conditions must be fulfilled in order to ensure optimal output and a
long service life of the machine.
Do not operate the machine at ambient temperatures above +45 °C (+104 °F) or below
−15 °C (−5 °F).
To Next Page
Loading...
