BA 1404 en – Edition 2.7 * 1404b330.fm 3-43
Operation
When entering or leaving the cab, the door must be locked in the arrester!
☞ Raise control lever base 5 with handle A to position B
➥ The gas strut keeps the control lever base in the top position
Do not use handle A on the control lever base as a support to ease your
entrance to the cab:
☞ Use the entrance handholds on the cabin
☞ Fold control lever base 5 down to position C once you are in the cab
➥ The gas strut keeps the control lever base in the lower position
The height of the control lever base can be set with stop bolt D
Enter and leave the cab only through the door as a rule. You can enter and exit the
cab through the front and the right-hand window in an emergency.
3.24 Engine cover
Opening:
☞ Pull lever A toward B
Abb. 107: Control lever base
A
7
8
5
B
D
A
5
C
Abb. 108: Engine cover lock
L
R
S
A
B
To Next Page
Loading...
