BA 1404 en – Edition 2.7 * * 1404b540.fm 5-41
Maintenance
• Heating function ●●
• Check pedal function ●●
• Hydraulic quickhitch (lock) ●●
Leakage check ( ):
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings of the following assemblies and components. Repair if necessary:
• Visual check ●●
☞ Engine, hydraulic system and hydraulic components ●●
☞ Cooling circuit ●●
☞ Travelling drive ●●
☞ Hydraulic quickhitch (hoses, valve) ●●
1. Drain engine oil the first time after 50 o/h, then every 250 o/h
2. Replace the engine oil filter the first time after 50 o/h, then every 250 o/h
3. Replace the fuel filter the first time after 50 o/h, then every 500 o/h
4. According to the dirt indicator, every 1000 o/h or once a year at the latest. (Replace after 50 o/h when in extensive use in environments with acidic air, such as acid production facilities, steel and aluminum mills, chemical plants and other nonferrous-metal plants)
5. Replace the hydraulic oil filter insert the first time after 50 o/h, then every 500 o/h
6. Replace the hydraulic oil for the first time after 500 oh; second oil change with 1000 oh; all others every 1000 oh
7. Drain the gearbox oil the first time after 50 o/h, then every 1000 o/h
8. Clean the water ducts every other 1000 o/h servicing
9. Check the first time after 50 s/h, then every 500 s/h
10. Check once a week
11. Twice daily when used in water
5.18 Maintenance plan (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance work
(daily)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 1500 o/h
Every 2000 o/h
Customer
Authorized
service center
To Next Page
Loading...
Need help?
General
