3-46 BA 1404 en – Edition 2.7 * * 1404b330.fm
Operation
Before using the machine, before starting work or when changing users, ensure that all
visual aids (for example the mirrors) work correctly, that they are clean and adjusted in
accordance with the instructions in this Operator’s Manual. The operator must observe the
local regulations.
• Use safety-oriented ladders and work platforms for adjustment work on the machine.
• Never use machine parts or attachments/superstructures as a climbing aid.
Adjusting the mirrors
Adjust the mirrors in order to:
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear left edge of the machine in the left mirror.
• Ensure visibility of the rear right edge of the machine in the right mirror.
We recommend having the mirrors adjusted by a second person.
No modifications may be carried out that impair visibility. It will cause the
machine to lose conformity and its approved license.
Abb. 111: Adjusting the mirrors
To Next Page
Loading...
Need help?
General
