Application-specific settings
Settings assigned to customizable components (ExpressKeys, pen buttons, etc.) can be further customized for a
specific application. This makes performing functions in the application faster and easier.
Tip: Customizable components that you can create application-specific settings for include
ExpressKeys, pen buttons, the pen tip, Touch rings, Rocker rings, On-screen shortcuts, Touch
& gestures, and Touch strips, depending on your device.
The Application list at the bottom of Wacom Center's main content area allows you to add individual applications,
and then tailor your customizable component settings for that application. For example, if you select an application
icon and change the pen's settings, the changes will apply to the pen only while you are using that application.
Application-specific settings can be used with all Wacom devices, and with the ExpressKey Remote device.
Note: When Application-specific settings are added, the All icon changes to All other
applications and an application icon is displayed for the newly added application(s).
Topics on this page
Create an Application-specific setting
Remove an Application-specific setting
Remove all Application-specific settings from a pen
Create an Application-specific setting
1. Open Wacom Center.
2. Select your device in the Devices sidebar.
3. Select a customizable component (a pen button, for example) for which you wish to create Application-
specific settings.
4. At the bottom of the main content area, click the add application button.
5. In in the Select an application window, select an application and click OK. If you don't see your application,
click the Browse button to select the executable file of any application installed on your computer.
6. With the newly added application icon selected in the application list, create your Application-specific settings
for the customizable component selected in step 3.
Note: After adding an application, its icon will display in the Application list whenever
the customizable component is selected in the Devices sidebar.
To Next Page
Loading...
