WACOM One - What the LED Means

1. If the first computer is on and within range of the device:
1. Unpair your device from your first computer in the computer's Bluetooth menu.
2. The LED on the device will turn off to indicate the connection has been lost.
2. Confirm the driver is installed on your second computer.
3. Repeat the connection steps at the top of this page with your second computer.
What the LED means
Information is conveyed by the status and color of the LED:
LED Color Meaning
Off
If connected to a wall adapter by USB cable this indicates the battery is fully charged.
Otherwise, it means the device is off.
White Connected to computer by USB cable, battery fully charged
Blue
(not blinking)
Connected to computer by Bluetooth
Blue
(blinking slowly)
In pairing mode, attempting to connect to computer
Blue
(blinking quickly)
Attempting to reconnect to last paired computer
Orange
(not blinking)
Connected to computer or wall adapter by USB cable, battery charging (> 10%)
Orange
(blinking)
Battery is low (<= 10%) and connected by Bluetooth, attach to a computer or wall adapter
by USB cable to charge
| Do not share my information | Cookies | Terms of use | Privacy Policy | California Privacy
User's Manual
69
69