46
VERSION 01/2018
ORDER NUMBER DOC 2340851
Cobra 40-10 / 40-25
10.4 CLEANING THE PARTS AFTER DISASSEMBLY
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the cleaning agents and working media on the basis
of the safety data sheets.
Please note:
Thoroughly clean all reusable parts with a suitable cleaning agent.
All uninstalled parts have to be clean and dry after cleaning. Care should be taken
that these parts remain free of solvents, grease or sweat from the hands (salt water).
Clean and mount wearing gloves.
10.5 ASSEMBLY OF THE DEVICE
In Chapter 14 the order numbers for device spare parts can be found, as well as for wearing
parts such as seals.
Defective parts, O-rings and seal sets must always be re-placed.
Use greases and glues in accordance with Chapter 14.
Observe torque specications in Chapter 14.
Mounting materials
Order No. Quantity Designation Smaller tanks
9992590 1 pc ≙ 50 ml Loctite 222
9992511 1 pc ≙ 50 ml Loctite 243
9992528 1 pc ≙ 150 g Loctite 270
9992831 1 pc ≙ 50 ml Loctite 542
9998808 1 pc ≙ 18 kg! Mobilux EP 2 grease 400 g tube ≙ Order No. 2355418
9992616 1 pc ≙ 1 kg can Molykote DX grease 50 g tube ≙ Order No. 2355419
322912 1 pc ≙ 250 ml Hydraulic oil - Wagner
Brand notice
The brands specied in this document are property of the respective owners. Loctite , for example, is a
registered brand of Henkel.
To Next Page
Loading...
Need help?
General
