WAGNER Cobra 40-10 Original Operating Manual

9
VERSION 01/2018
ORDER NUMBER DOC 2340851
Cobra 40-10 / 40-25
2.4 PROCESSIBLE WORKING MATERIALS
Fluid materials like paints and varnishes.
Application Cobra 40-10 Cobra 40-25
Water-dilutable products
Solvent-based lacquers and paints
Two-component coating products
Emulsions
UV lacquers
Primers
Epoxy and polyurethane lacquers, phenolic lacquers
Liquid plastics
Wax-based underside protection
Shear-sensitive lacquers
recommended limited suitability not suitable
NOTICE
Abrasive working materials and pigments!
Greater wear of parts carrying the product.
Use the application-oriented model (ow rate/cycle, product, valves, etc.) as
indicated in Chapter 5.5.
Check if the uids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.5.1.
Use suitable combinations of devices (packings, valves etc.)
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Application Cobra 40-10 Cobra 40-25
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
recommended limited suitability not suitable
2.5 MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g. powder are processed.
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.

WAGNER Cobra 40-10 Specifications

General

Brand	WAGNER
Model	Cobra 40-10
Category	Water Pump
Language	English