WAGNER Cobra 40-10 User Manual

Operating manual High-pressure double diaphragm pumps Cobra 40-10; Cobra 40-25
2 Using in Accordance with the Instructions
10 Order number 2340851 | Edition 05/2022
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
4 Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in the Chapter Technical Data.
4 Check if the fluids and solvents being used are compatible with the pump
construction materials as indicated in the Chapter Materials of Paint-wetted Parts.
Wear caused by abrasive working materials is not covered by the warranty.
Info
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
Typical applications
Application Cobra 40-10 Cobra 40-25
Furniture industry ↗ ↗
Kitchen manufacturers ↗ ↗
Joinery ↗ ↗
Window factories → ↗
Steel-processing industry → →
Construction of vehicles ↗ ↗
Shipbuilding ↘ ↘
Signs and definitions: ↗ recommended
→ limited suitability
↘ not suitable
2.5 MISUSE
Misuse can lead to physical injury and/or property damage! Special attention must be paid
that:
4 No dry coating products, e.g., powder are processed.
4 No food, medicine or cosmetics are processed. It is important to note that the device's
materials are not food-safe.

WAGNER Cobra 40-10 Specifications

General

Brand	WAGNER
Model	Cobra 40-10
Category	Water Pump
Language	English