18
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
6 COMPONENT DESCRIPTION
6.1 FUNCTIONAL DESCRIPTION
The Pro Tech M controller is used in automatic coating systems. The controller controls:
Powder output quantity
Powder atomization
High-voltage
Current limitation
Motion technology
Gap control
Height control
Depth control
Quantity Order No. Designation
1Pro Tech M controller, consisting of:
1 2330000 MCM Master Control
1 2330001 MCM CPS I/O Control
1 2330002 MCM cable set 10 m
The standard equipment includes:
1 2335279 Declaration of Conformity
1 2335143 Operating manual, German
1 see Chapter 1.3 Operating manual in local language
6.3 SCOPE OF DELIVERY
6.2 PROTECTIVE AND MONITORING EQUIPMENT
Protective and monitoring equipment!
Risk of injury and damage to the device.
Protective and monitoring equipment must not be removed,
modi ed or rendered unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment,
the system must not be operated until these defects are
remedied.
WARNING
To Next Page
Loading...
