43
ProfiTech M
2 3 4 51 6
7 8 9 10 1211 13 14 15
P_01943
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
7.6.1 CPS CONTROL CABINET DESIGN
1 Safety fuse for 24 VDC departures at X12 and X30 terminal blocks
2 Multifunctional module MCM I/O unit, Order No. 2330003
3 Universal power supply 220 V±20% / 24 VDC, 5 A for supplying the control system
4 Pilz safety switching device, Order No. 2325207
5 Safety protection for the secure separation of the motion technique's power supply
6 Circuit breaker for motion, EGP S2 and control system
7 Push-in connector for 4 CAN buses, 2 EPG-Sprint Xs and 1 conveyor encoder
8 X10 terminal block for light barriers
9 X12 terminal block for external emergency stop button
10 X13 terminal block for conveyor technology and system OK
11 X20 terminal block for powder center
13 X21 terminal block for booth control cabinet
14 X30 terminal block for motion technique
15 X30 terminal block for EPG S2 group supply with AC
16 X40 terminal block 10 mm² for AC supply input L1, L2, L3, N, PE
7.6 SYSTEM DESCRIPTION
To Next Page
Loading...
