3
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
Table of Contents
1 GENERAL 6
1.1 Preface 6
1.2 Warnings, Notices, and Symbols in this Operating Manual 6
1.3 Languages 7
1.4 Abbreviations 7
1.5 Terminology for the Purpose of this Manual 8
2 CORRECT USE 9
2.1 Device Type 9
2.2 Type of Use 9
2.3 Use in Potentially Explosive Areas 9
2.4 Safety Parameters 9
2.5 Processible Working Materials 10
2.6 Reasonably Foreseeable Misuse 10
2.7 Residual Risks 10
3 IDENTIFICATION 11
3.1 Explosion Protection Identi cation 11
3.1.1 MCM Master Control 11
3.1.2 MCM CPS I/O Control 11
3.2 Type Plate 12
4 GENERAL SAFETY INSTRUCTIONS 13
4.1 Safety Instructions for the Operator 13
4.1.1 Electrical Devices and Equipment 13
4.1.2 Sta Quali cations 13
4.1.3 Safe Work Environment 13
4.2 Safety Instructions for Sta 14
4.2.1 Safe Handling of WAGNER Powder Spray Devices 14
4.2.2 Grounding the Device 14
4.2.3 Product Hoses 14
4.2.4 Cleaning 15
4.2.5 Handling Powder Lacquers 15
4.3 Protective and Monitoring Equipment 15
4.4 Safety Feature Identi cation 16
5 DISCLAIMER 17
5.1 Hardware 17
5.2 Software 17
6 COMPONENT DESCRIPTION 18
6.1 Functional Description 18
6.2 Protective and Monitoring Equipment 18
6.3 Scope of Delivery 18
6.4 MCM Controller Components 19
6.5 Control Unit/Spray Gun Components 22
6.6 Pulse Generator Components 25
6.7 Light Grid Set LGS 25 Components 26
6.8 Kontur 2 Light Curtain Components 26
6.9 Light curtain CML720i Components (from 06/2014) 28
6.10 Motion Equipment Components 30
To Next Page
Loading...
