WAGNER ProfiTech M - ALIGNMENT OPERATION; Light Curtain Alignment Procedure

76
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
7.14.3 ALIGNMENT OPERATION
The "Alignment operation" function is used to align the light curtains to one another. This
function can be activated via the menu on the light curtain's local operating display. The
 rst and last beams in the light curtain are shown as bars.
Procedure:
This appears on the receiver's display when the light
curtain is switched on.
1. Press "
" key, the menu shown in the left appears.
2. Press "
" key, the "Mode" function is displayed with a
bright background.
3. Press "
" key, the "Operation" function is displayed
with a bright background.
4. Press "
" key, the "Alignment" function is displayed
with a bright background.