69
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
7.14 COMMISSIONING THE CML720I LIGHT CURTAINS
After assembly, the CML720i light curtains must be con gured and aligned.
The individual steps are described below.
Lock:
The light curtains have a lock to prevent incorrect adjustments.
The lock is active when the keys do not respond to input.
The lock can be deactivated as described below:
– Setting on the Pro Tech M panel
– Switch o the panel and restart the light curtain (power o - on)
– Unplug CAN bus cable before switching on light curtains
Light curtain con guration
Wizard AlarmMachine
Yes N o
System
Settings
Recipe editor
Cleaning
Correction
Load recipe
Preparation
Home
General Recognition Reciprocators GunsSliding table
Light curtain type
Hanger fading out [cm]
Lock on light curtain
only height light curtain
To Next Page
Loading...
