72
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
7.14.1 SETTING THE BAUD RATE
The baud rate must be set to 250 kBaud. The baud rate is set as described below.
Procedure:
This appears on the receiver's display when the light
curtain is switched on.
1. Press "
" key, the menu shown in the left appears.
2. Press "
" key, the "Mode" function is displayed with a
bright background.
3. Press "
" key until the "CANopen" function is
displayed with a bright background.
4. Press "
" key, the "NodeID" function is displayed with
a bright background.
To Next Page
Loading...
