WAGNER ProfiTech M - Page 73

73
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
5. Press " " key, the "Baud rate" function is displayed
with a bright background.
6. Press "
" key, the set baud rate function is displayed
with a bright background.
7. Press "
" key until the desired baud rate is displayed
with a bright background.
8. Press "
" key, the "Selection con rmation" symbol is
displayed with a bright background to the left of the
baud rate.
Either the "Reject selection" function or "Return to
selection menu" function is set by pressing the "
"
key.
The set function is adopted by pressing the " " key.
9. Press "
" key, the "Back" function is displayed with a
bright background.
10. Pressing the " " key takes you back to the
superordinate menu.