58
ProfiTech M
P_02185
P_02186
P_02187
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
The 24 VDC supply for the light curtain portal is connected to the X10 terminal block with
the connection cable (Order No. 3052606).
The CAN bus signal is connected on connection M12 "LC" in the MCM CPS.
CAN bus cables with a length of 5 m; 16.40 ft., 10 m; 32.81 ft. or 20 m; 65.62 ft can be used.
Cable coupling,
M12 (LC)
Terminal, X10:1 = 24 VDC (wire 1)
Terminal, X10:3 = GND (wire 2)
Cable plug M12
Supply 24 VDC ± 20% = 19.2 - 28.4 VDC
Maximum current 500 mA with three light curtains
Connect wire 1 to Connection G
Connect wire 2 to Connection F
Cut o grounding cable
Plug X9
Pin G +24 VDC
Pin F GND
Pin J PNP OUT
Pin H free
Pin K free
To Next Page
Loading...
