WAGO 750-882 - Snmp V3

168 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
10.6.2 SNMP V3
In SNMP version 3, exchanging messages is user-related. Each device, that
knows the passwords set via WBM, may read or write values from the fieldbus
controller.
In SNMP v3, user data from SNMP messages can also be transmitted in
encoded form. This is why SNMP v3 is often used in safety-related networks.
Abbildung 65: WBM-Seite „SNMP V3“