WAGO 750-882 - Table 277: Module Configuration; Table 278: Module Configuration; Table 279: Module Configuration; Table 276: Analog Output Point Extended

304 Fieldbus Communication WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
Common Services
Table 276: Analog Output Point Extended 3 (74
hex
) – Common service
Service
code
Service available
Service name
Description
Class
Instance
0E
hex
Yes
Yes
Get_Attribute_Single
Supplies contents of the appropriate
attribute
10
hex
No
Yes
Set_Attribute_Single
Modifies an attribute value
12.3.5.29 Module Configuration (80
hex
)
Instance 0 (Class Attributes)
Table 277: Module Configuration (80
hex
) – Class
Attribute ID
Access
Name
Data type
Description
Default
value
1
Get
Revision
UINT
Revision of this object
1 (0x0001)
2
Get
Max Instance
UINT
Max. number of instances
-
Instance 1 … 255 (Clamp 0 up to 254)
Table 278: Module Configuration (80
hex
) – Instance 1...255
Attribute ID
Access
Name
Data type
Description
Default
value
1
Get
ModulDescription
WORD
Description of connected modules
(module 0 = coupler/controller)
Bit 0: Module has inputs
Bit 1: Module has outputs
Bit 8-14: Data width internally in
bit 15: 0/1 Analog/digital
module
For analog modules, bits 0-14
identify the module type, e.g., 401
for module 750-401
-
Common Services
Table 279: Module Configuration (80
hex
) – Common service
Service
code
Service available
Service name
Description
Class
Instance
0E
hex
Yes
Yes
Get_Attribute_Single
Supplies contents of the appropriate
attribute