34 Lexa PLUS| Instructions for Use |RIS-311 ENG Rev03 |29/08/2022 |© W&H Sterilization Srl
Getting started
Sterilizer setup
GUIDED CONFIGURATION
At the first start- up of the sterilizer, the Guided Configuration
procedure automatically appears; this procedure allows to set some
parameters of the unit, such as:
n Language
n Network connection (where applicable)
n Time zone settings
n Date & time settings
n Sterilizer name
At any time, to force the Guided Configuration:
1 On the homepage, tap > >
2 Follow the Guided Configuration on the sterilizer screen.
SET THE LANGUAGE
1 On the homepage, tap > > >
2 Tap the language you prefer.
3 Tap to confirm and go back to the homepage.
SET THE DATE AND TIME
To change the date and time format, current date and time zone:
1 On the homepage, tap > >
2 Tap the value you want to change (format, time, date and/or
time zone).
3 Tap the desired value.
4 Tap to confirm and go back to the previous page.
SET THE STERILIZER NAME
To change the sterilizer name that appears in the cycle reports:
1 On the homepage, tap > > >
2 Tap the text box: a keyboard appears.
3 Enter the new sterilizer name.
4 Tap to confirm.
SET THE DISPLAY BRIGHTNESS
To change the display brightness:
1 On the homepage, tap > >
2 Tap or to change the value.
3 Tap to confirm.
To Next Page
Loading...
