Administrator
38 Lexa PLUS| Instructions for Use |RIS-311 ENG Rev03 |29/08/2022 |© W&H Sterilization Srl
CONTENTS
This section deals with the following subjects:
User management (optional) 38
Traceability options (optional) 39
Hide/Unhide a cycle 40
User management (optional)
FUNCTION AVAILABILITY
To access the user management functions a special code must be
entered. The special code is required only at the first access to the
User Management ( ) menu: after the code was entered, the
function is enabled and there is no need to enter the code again.
If you want to disable the function another special code must be
entered.
Note: for more information contact your dealer.
WHO CAN MANAGE USERS AND RESET THEIR PIN
Only a user with administrator rights can create and delete users and
reset the PIN code of a user to "0000".
ADD A USER
1 On the homepage, tap > >
2 Tap your user name.
3 Enter the PIN and tap to confirm.
4 Tap .
5 Tap the text box:a keyboard appears.
6 Enter the new user name and tap to confirm.
7 If desired, tap to give the administrator authority to the new
user.
8 Tap to confirm:the PIN of the new user is set to "0000" and
a confirmation message appears.
9 Tap and then to go back to the previous page.
10 Tap to return to the homepage.
To Next Page
Loading...
