Maintenance
66 Lexa PLUS| Instructions for Use |RIS-311 ENG Rev03 |29/08/2022 |© W&H Sterilization Srl
Monthly or 50-cycle maintenance
CLEANING THE DOOR GASKET AND THE CHAMBER FACE SIDE
Proceed as follows:
1 Clean the door gasket and the outer edge of the chamber with a non-abrasive
cloth moistened with clean water.
Notice:
Do not use abrasive products, cutting tools or sharp objects.
1 Rinse with clean water.
Note: when the seal is new it might be necessary to hold the door gently closed at the
sterilization start.
To Next Page
Loading...
