Maintenance
Lexa PLUS| Instructions for Use |RIS-311 ENG Rev03 |29/08/2022 |© W&H Sterilization Srl 67
CLEANING THE CHAMBER AND THE CHAMBER ACCESSORIES
Proceed as follows:
1 Remove the trays and the chamber rack.
2 Clean the chamber with a damp sponge and a mild detergent
solution paying attention not to bend or damage the temperature
probe inside the sterilizer chamber.
3 Rinse with water.
4 Clean the trays and the chamber rack with a damp sponge and a
mild detergent solution.
5 Rinse with water.
6 Reposition all pieces of the chamber accessories properly.
Note: The trays and the tray holder may also be cleaned in a washer
disinfector.
To Next Page
Loading...
