Waters 2545 Binary Gradient Module User Manual

3-2 Maintenance
Maintenance considerations
Safety and handling
Observe this warning when you perform maintenance procedures on your
binary gradient module.
Proper operating procedures
To keep your binary gradient module performing properly, follow the
operating procedures and guidelines.
Spare parts
Waters recommends that you replace only parts mentioned in this document.
For spare parts details, see the Waters Quality Parts Locator on the Waters
web site's Services/Support page.
Contacting Waters Technical Service
If you are in the USA or Canada, contact Waters Technical Service
(800 252-4752). If you are not in the USA or Canada, visit
http://www.waters.com
and click About Waters > Worldwide Offices, or phone
your local Waters subsidiary or Waters’ corporate headquarters at 34 Maple
Street, Milford, MA 01757, USA.
When contacting Waters, have the binary gradient module serial number
available.
Warning: To prevent injury, always observe good laboratory
practices when you handle solvents, change tubes, or operate the
binary gradient module. Know the physical and chemical properties
of the solvents you use. Refer to the Material Safety Data Sheets for
the solvents in use.

Waters 2545 Binary Gradient Module Specifications

General

Brand	Waters
Model	2545 Binary Gradient Module
Category	Control Unit
Language	English