Waters 2690 User Manual

Waters 2690
Separations Module
Quick Start Guide
34 Maple Street
Milford, MA 01757
WAT553-03TP, Revision 3

Waters 2690 Specifications

General

Brand	Waters
Model	2690
Category	Control Unit
Language	English

Summary

2 Preparing the Separations Module for Operation

2.1 Powering On and Startup Diagnostics

Covers powering on the module, startup diagnostics, and the main screen.

2.2 Configuring the Separations Module

Details module configuration for different operating modes like No Interaction and System Controller.

2.3 Preparing the Solvent Management System

Outlines steps to prepare the solvent management system, including degassing and priming.

2.4 Preparing the Sample Management System

Details steps to prepare the sample management system, including purging and loading carousels.

3 Performing a Direct Control Run

Setting Up a Direct Control Run

Accessing Direct Control Functions

4 Making Automatic Runs

4.1 Making Automatic Runs in Stand-Alone Mode

Details setting up and making automatic runs in System Controller or No Interaction modes.

4.2 Making Automatic Runs Under Millennium Control

4.3 Making Automatic Runs Under MassLynx Control

6 Recommended Preparation Procedures

Preparing a New or Dry Separations Module (Sparge-Based)

Preparing a New or Dry Separations Module (Degasser-Based)