Waters 2545 Binary Gradient Module User Manual

4-4 Troubleshooting
Alarm reset
When an error occurs, the binary gradient module displays an alarm message
and emits three short beeps.
To acknowledge an alarm, press the Stop Flow button. The binary gradient
module displays the main screen or the next alarm message, or resets the
pump. Alarms sometimes require resetting the pump. If the pump requires a
reset, it resets when the last alarm is acknowledged. When MassLynx
downloads a method or resets communications, the binary gradient module
acknowledges all outstanding alarms and resets the pump, if required.

Waters 2545 Binary Gradient Module Specifications

General

Brand	Waters
Model	2545 Binary Gradient Module
Category	Control Unit
Language	English